Ajuda
Editando passo 1 —

Aviso: Você está editando um pré-requisito ao guia que você estava consultando. Quaisquer alterações que você faça afetarão todos os 16 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Three Pentalobe screws secure the battery to the upper case. They can be removed with this special driver.

If you don't have a Pentalobe driver, a 1.5 mm flathead screwdriver can be used in a pinch. Be sure the head of your flathead screwdriver fits snugly across two of the five "points" of the screw head before trying to break the screw free, as a loose fit will easily strip the screw head.

If the head of your screwdriver fits too loosely, find a bigger bit and file it down until it fits snugly before proceeding.

You do not necessarily have to follow steps 3-7 to remove the battery in order to replace the hard drive. However, it is recommended to remove all power sources from electronics before working on them.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.