Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 2 —

Tipo de Passo:

Arraste para reorganizar

Once all the contacts are desoldered, the old joystick can be removed.

Check that all the holes are cleared of old solder. Hypodermic needles as well as very small drill bits can be used to clear the holes.

Insert the new joystick into the circuit board. Make sure it is properly seated and that all the contacts line up with the holes in the circuit board.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.