Ir para o conteúdo principal
Ajuda
Editando passo 3 —

Tipo de Passo:

Arraste para reorganizar

Once the main casing is removed, you'll need to remove the back panel. Keep the amplifier on its side and remove the two, Phillips #1 screws holding it on, on both sides of the amplifier.

You'll also need to turn the amplifier over, and remove 5 additional, Phillips #1 screws from the back of the amplifier.

Leave these screws in, as they aren't required to be removed, in order to take the back panel off.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.