Pular para o conteúdo principal
Ajuda
Editando passo 3 —

Aviso: Você está editando um pré-requisito ao guia que você estava consultando. Quaisquer alterações que você faça afetarão todos os 3 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

A ribbon cable is attached to the back of the keyboard. Avoid lifting or moving the keyboard more than a couple inches before you disconnect the ribbon cable or you may damage it.

Carefully pry up one of the top corners of the keyboard with a prying tool. Slide the tool along the top of the keyboard to release it from the housing. Pull the top of the keyboard towards you an inch or two.

The keyboard may make some cracking noises as you pry it from the casing. This is expected.

Pull the keyboard up and away from you, as it is held in by clips in the front. It is not yet disconnected.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.