Pular para o conteúdo principal
Ajuda
Editando passo 8 —

Aviso: Você está editando um pré-requisito ao guia que você estava consultando. Quaisquer alterações que você faça afetarão todos os 4 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Carefully wedge a plastic card under the battery on the side nearest the logic board.

Do not pry against the logic board or you may damage the phone.

Avoid prying near the top edge of the battery, or you may damage the upper component ribbon cable.

Slide the card from the top of the battery to the bottom, pushing toward the edge of the case.

If you still trouble, apply some isopropyl alcohol (90% or greater) under the battery and let it flow around the adhesive to help weaken it. High concentration isopropyl alcohol acts as a solvent and dries without leaving any residue, so it will not hurt your iPhone.

If necessary, repeat the same procedure with the case side of the battery.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.