Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Ajuda
Editando passo 11 —

Tipo de Passo:

Arraste para reorganizar

Apply thermal paste onto the main chip or on the connection side of the fan.

Place the heat-sink over the GPU carefully, lining up any screws or clips.

Apply heatsink on thermal pads as applicable.

Use only a small amount of heatsink and spread evenly using a card, or apply pressure evenly when connecting components.

If there is thermal tape or pads that were removed for the reflow, place these back in their original position.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.