Pular para o conteúdo principal
Ajuda
Editando passo 1 —

Tipo de Passo:

Arraste para reorganizar

NOTE: This is the most difficult step.

Locate system board (silicone board with all of the circuitry on it). Notice that there is a black piece at the top of the system board (with the camera in it).

Use the pry bar to push the 2 black tabs away from the system board (located on the sides of the board). These tabs may snap back onto the board, so attempt to hold them off of the board.

Use the pry bar to pry the black piece at the top of the phone (looks to be attached to the system board, but is not).

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.