Pular para o conteúdo principal
Ajuda
Editando passo 3 —

Tipo de Passo:

Arraste para reorganizar

Next use a large ratchet wrench with a 19mm socket to remove the two bolts that hold the caliper to the vehicle.

These bolts are in very tight, and had thread locker on them from the factory, so you may need a very long wrench or a breaker bar in order to get enough leverage to remove these two bolts.

Hold on to the caliper as you remove the second of the two bolts so it doesn't fall when you remove the bolt.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.