Pular para o conteúdo principal
Ajuda
Editando passo 2 —

Tipo de Passo:

Arraste para reorganizar

Next you will need to remove the soft rubber brake hoses.

You will have to start by disconnecting the rubber hose from the hard line connection up inside the fender well. Then you can loosen it from the caliper and remove the line. This takes a 14mm wrench for the soft hose and an 11 mm wrench for the brake line.

For more information and tips on removing these lines, [link de guia inválido]

Speaking of the rubber hoses, this is a great time to replace them with new parts if they show signs of age since they are already off of the car.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.