Ir para o conteúdo principal
Ajuda
Editando passo 7 —

Tipo de Passo:

Arraste para reorganizar

Reach up inside the shell of the door and gently pull the switch down towards the opening in the door. Do not force the vacuum lines to bend excessively.

Inspect the switch, especially the metal end. If it looks heavily corroded/rusted or if the metal mechanism on the switch is very loose the switch may be a source of leaks. Consider replacing it. The switch on this car was leaking and was already replaced in this picture.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.