Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 6 —

Tipo de Passo:

Arraste para reorganizar

Lay your jacket out, holding it to full length but not stretched. Measure from the top of the collar to waist.

Measure the same length on your zipper from the zipper stop up. Mark this with tailor’s chalk.

Measure two inches above that line and make a second mark with your tailor’s chalk.

Cut the zipper at the first mark you made. Be sure to cut between the teeth of the zipper to preserve your scissors.

Be sure that the zipper slider is below your first mark so you don't cut it off!

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.