Pular para o conteúdo principal

Tipo de Passo:

Arraste para reorganizar

Place the heat-sink assembly back on its hinges.

Pivot the heat-sink assembly back to its original position and secure it with the two screws removed earlier.

Replace the floppy drive's ribbon cable (if you have one).

NOTE: Be sure the heat-sink assembly is seated properly and secured tightly. If it is loose or uneven, it cannot absorb heat properly and could cause your PC to unexpectedly shut down to prevent overheating.

Clean the heat sink before reassembly

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.