Pular para o conteúdo principal
Ajuda
Editando passo 10 —

Tipo de Passo:

Arraste para reorganizar

This step is for anti-glare display machines only. Skip this step if you have a glossy display.

Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.

One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.

Lift the AirPort board/cable retainer assembly out of the upper case.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.