Ir para o conteúdo principal
Help
Editando passo 2 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 5 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Turn the iHome 180 degrees and carefully pull up on speaker cases to pry them loose from the bottom case.

Prying the Motherboard Assembly from the Upper Case will require a good amount of force. Be very careful not to break the case, or yank on any of the ribbon wires attached to the underside.

Pulling outwards on the sides of the Upper Casing can help loosen the assembly.

If it seems too difficult to remove, chances are that a screw is still attached. Make sure you've removed every screw listed before proceeding to this step.

Pull the back adapter cover off.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.