Ir para o conteúdo principal
Ajuda
Editando passo 33 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Tipo de Passo:

Arraste para reorganizar

Locate 8x flex cables connected the logic board

For each flex cable, pull up on their plastic flap with a pair of tweezers

Take the hook end of a Halberd Spudger and gently pry up the retaining flap on the ZIF socket of each cable

Make sure to use gentle force as this shouldn't require a lot of force. If excessive force is used, you could break the flex cable.

Be sure you are prying up on the hinged retaining flap, not the socket itself.

Take your tweezers and pull on the plastic cover to pull each cable away from the ZIF socket to remove the flex cable from it's socket

Make sure to use gentle force as this shouldn't require a lot of force. If excessive force is used, you could break the flex cable.

If any of the plastic flaps break off don't worry! You can use a combination of your spudger and tweezers to gently pull out the flex cable from it's respective socket

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.