Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Ajuda
Editando passo 5 —

Tipo de Passo:

Arraste para reorganizar

Warning: When removing or installing a card, handle it only by the edges. Do not touch its connectors or any of the components on the card. Lift the card straight out from the connector to remove it, and insert it straight into the connector to install it. Do not rock the card from side to side and don’t force the card into the slot.

1) Release the small locking clip at the front of the card’s logic board connector by pushing the clip up toward the media shelf.

2) Holding the card by the top corners, pull up the card and remove it from its expansion slot.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.