Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Editando passo 1 —

Tipo de Passo:

Arraste para reorganizar

Using a Phillips #2 screwdriver, remove the two screws (circled in red) attaching the fan assembly to the unit.

Carefully disconnect the fan connector from the socket, as depicted in the second picture.

The controller connector panel can be gently pulled out of the main unit and laid down, as depicted. This is not strictly required, but may provide more maneuverability inside the case.

Make sure to not pull out the wires while removing the fan. Doing so may damage the connector wire or the PCB.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.