Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos


Editando passo 8 —

Tipo de Passo:

Arraste para reorganizar

If you haven't done so already, remove the speaker assembly on the right by loosening a single T-10 (2.5mm x 14mm) screw.

Remove the two T-9 (2mm x 7mm) screws from the bottom right and left corners of the RAM slots that secure the black plastic bracket to the frame.

Now simply lift out the logic board while keeping a careful eye on all those wires you just disconnected. The heatsink fins are attached to the logic board and lift out with it.

Note: There is a bit of foil tape on the far right (by the audio ports) that will need to be pulled up from the case as well while you lift out the motherboard.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.