Pular para o conteúdo principal
Ajuda
Editando passo 1 —

Tipo de Passo:

Arraste para reorganizar

Remove the two (2) dummy cards from the laptop.

Using a Phillips head screwdriver, unscrew the six (6) screws from the bottom of the laptop.

Unscrew the two (2) screws from the back of the laptop, located at the extreme left and right of the back panel.

Slide bottom cover forward and lift upwards to remove. You may need to use a strong spudger to force a gap along the base edge from the ethernet port on the right, to the kensington port on the left.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.