Ir para o conteúdo principal
Help
Editando passo 2 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 4 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

It will be necessary to slide the small clear plastic cable retainer (boxed in red) glued to the logic board out of the way before disconnecting the camera cable. Be careful not to break any components off the board as you slide it away from the camera cable connector.

Pull the camera cable connector toward the optical drive to disconnect it from the logic board.

This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.