Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos


Editando passo 2 —

Tipo de Passo:

Arraste para reorganizar

The battery board is permanently attached to the battery. Check to make sure it has adequate clearance to come out together with the battery, without snagging on other components.

Insert the flat edge of a spudger under the battery board on the side nearest the logic board.

Lift the battery board to an angle of about 45 degrees. If necessary, lift the battery power connector out of the way to give the battery board extra clearance.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.