Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 1 —

Tipo de Passo:

Arraste para reorganizar

Use a T5 Torx driver to remove the two 3.1 mm screws securing the battery board.

These screws lie under the battery board data cable. You may need to gently maneuver the cable from side to side to access each screw.

Either screw may have a water damage indicator sticker on the top. If so, remove it with a pair of tweezers and set it aside before removing the screw.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.