Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos


Editando passo 6 —

Tipo de Passo:

Arraste para reorganizar

Next, remove the front panel from the main part of the unit. The ribbon cable connects the two. To remove, gently pull out the dark brown connector from both sides of the beige holder. This will release the ribbon cable which can then be pulled out and separated. There are three in total, two on the outside, one under the battery case and one on the lower part of the unit. The third one is on the inside of the unit.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.