Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 8 —

Tipo de Passo:

Arraste para reorganizar

Re-install the Loading Sill Cover.

Make sure the three white plastic clips are slid into their slots inside the Loading Sill Cover.

Put in position, line them up into their holes and press down.

Tip: To make the clips pop into position, you’ll probably have to give them each a good, solid whack with your hand. (The clips rarely break; if they do, they cost about $0.70 each.)

Re-install the four expanding rivets

Remove the center pins from the expanding rivets.

Push each rivet back into position, then insert the center pin and push it down.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.