Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 6 —

Tipo de Passo:

Arraste para reorganizar

Disconnect the wire harness connector.

Throw out the P.O.S. lock mechanism that failed on you.

Plug the new lock into the wire harness.

Screw the lock mechanism back in; there is some side-to-side adjustability but I found just putting it dead center had it lined up correctly with the door.

Tighten the bolts very firmly.

Don't strip the threads. You're putting steel bolts into steel threads so that's not likely, but these aren’t wheel bolts, so take it easy.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.