Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda

Tipo de Passo:

Arraste para reorganizar

Remove the expanding rivets. Use your flathead screwdriver (or trim tool) to carefully pull out the center pin. (This will allow the shaft of the rivet to un-spread itself, so you can pop it out.)

Then use the flathead screwdriver to pry underneath the edge of the rivet and work it out. This will require some force.

You'll have to bend over to look inside the boot to see the rivets. A flashlight will help a lot.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.