Ir para o conteúdo principal
Ajuda
Editando passo 3 —

Tipo de Passo:

Arraste para reorganizar

If you are only replacing the fingerprint sensor and not the fingerprint sensor gasket, skip this step.

Use an opening tool to pry the fingerprint sensor off of the gasket.

Remove the colored plastic liner on the replacement gasket to expose the adhesive.

Carefully align and lay the fingerprint sensor onto the sticky side of the gasket.

Once aligned, press down firmly with your finger to bond the adhesive.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.