Ir para o conteúdo principal
Editando passo 5 —

Tipo de Passo:

Arraste para reorganizar

The following four steps show how to remove and transfer the rear bezel. The bezel supports the rear cameras, flash, and the fingerprint sensor (on some models).

Heat an iOpener and apply it to the rear bezel for a minute.

Starting from the outward-facing side of the back cover, push the bezel inwards with a finger to loosen the bezel from its cutout.

Do not push too hard, or you may bend the bezel.

Alternatively, you can pry around the bezel with an opening tool to loosen it from the back cover.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.