Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 7 —

Tipo de Passo:

Arraste para reorganizar

With the exposed adhesive facing down, thread the Force Touch gasket down over the display (if connected) and set it into position in the case.

Slightly tilt the display forward so you can align the Force Touch gasket with the frame.

Make sure the connector lines up with its socket.

You can use the end of a pry tool to press the new Force Touch gasket into place all around the perimeter of the watch.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.