Ir para o conteúdo principal
Help
Editando passo 5 —

Tipo de Passo:

Arraste para reorganizar

Insert a spudger along the edge of the plastic plate on the top shell. Pry up gently until the glue releases. There is a large glue pad under this plate, but there is nothing else holding it on.

After prying off the plate, there are four screws marked in the rings to release the back plate from the screen plate.

Once the screws are removed, lift off the back plate to reveal the screen and plastic trim.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.