Ir para o conteúdo principal
Editando passo 4 —

Tipo de Passo:

Arraste para reorganizar

Apply a few drops of adhesive remover evenly along the elevated edge of your glued-down component.

A little bit goes a long way, so start with a very small amount. You can always add more later if needed. Applying the solvent in small amounts helps prevent unwanted leaks.

Wait 2-3 minutes for the liquid adhesive remover to penetrate and soften the adhesive before you proceed to the next step.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.