Pular para o conteúdo principal
Ajuda
Editando passo 3 —

Tipo de Passo:

Arraste para reorganizar

Leave the booster cables attached to both vehicles for approximately 10 minutes before attempting to start the Jeep. If it does not start right away, wait 30 seconds and try again. Continue to try until it starts, taking short breaks in between attempts.

Once the engine starts, let the Jeep run for about 5 minutes to recharge the battery.

In reverse order, remove the booster cables now that the Jeep is running and the battery has recharged.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.