Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 6 —

Tipo de Passo:

Arraste para reorganizar

Unscrew the two PH000 screws holding the joystick down.

Make sure to NOT disconnect the two side board cables. It may cause fatal damage to the controller.

Before you remove the joystick, remove the secured ribbon cable by opening the clip using the tip of a spudger.

Note that there is a small gasket below the joystick and that it has to be re-seated in place before inserting the new joystick.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.