Ir para o conteúdo principal
Editando passo 3 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 12 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

If the phone's rear glass is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

Press a suction cup onto the back cover.

Lift the back cover's bottom edge with your suction cup, opening a slight gap between the back cover and the frame.

This may require a significant amount of force, but you only need to open a very slight gap with the suction cup to insert your tool. If you have trouble, apply more heat to further soften the adhesive, and try again. The adhesive cools very fast, so you may need to heat it repeatedly.

Insert an opening pick in the gap you created and slide it to the bottom right corner.

Insert a second opening pick and slide it to the bottom left corner.

Insert a third opening pick to prevent the adhesive from resealing during the rest of the removal procedure.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.