Ir para o conteúdo principal
Ajuda
Editando passo 2 —

Aviso: Você está editando um pré-requisito ao guia que você estava consultando. Quaisquer alterações que você faça afetarão todos os 7 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Using your fingers, press down firmly on the plastic slide and push in the direction of the arrows shown above the word "Open" on the plastic.

Remove the plastic slide from its location and set it aside.

These plastic slides are not interchangeable, so make sure each goes back to its original location in reassembly.

Remove all 4 AA batteries by placing your fingernail at one end of the battery and applying force upwards until the battery is freed from its holder.

Set the batteries aside, careful to not get them wet.

Insert your fingernail or a prying tool under the notch of the plastic slide that is protecting the watch battery.

Apply force in the direction of the arrow shown above the word "Open" on the plastic. The plastic piece covering the watch battery should come loose.

Set this plastic covering aside as well.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.