Pular para o conteúdo principal
Ajuda
Editando passo 1 —

Tipo de Passo:

Arraste para reorganizar

Using your fingers or a probe, loosen the four small tabs located on the side of the faceplate sub-assembly by gently bending up the metal cover. (Two are shown in the picture while the other two are on the other side of the screen.)

Using the spudger, loosen the metal cover by prying it away from the six small plastic tabs. This can be done by gently working the spudger underneath the cover and pressing up on the cover around the tabs.

Remove the metal cover.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.