Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 8 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 3 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

After a couple minutes, insert one corner of a plastic card underneath the battery, starting from the lower edge of the bottom, right-most cell.

This shouldn't require much force. If you have trouble, apply more adhesive remover and give it 2-3 additional minutes to penetrate.

Try not to deform the battery. A damaged or punctured battery can leak dangerous chemicals and/or catch fire.

Wiggle the card from side to side and slide it all the way underneath both battery cells.

Lift the cells to fully separate the adhesive, but don't try to remove them from your MacBook yet.

Leave the plastic card temporarily underneath the cells to prevent the adhesive from re-bonding as you proceed to the next step.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.