Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Editando passo 2 —

Tipo de Passo:

Arraste para reorganizar

If your display isn't already broken, it is likely to break during this process. You might want to protect your hands and eyes from glass shards.

Push a spudger against the back of the display through the cutout in the midframe, where the charging port was located, to create a gap between the display and the frame.

The adhesive is really sticky so this can be a lengthy and difficult procedure. Take care not to damage any other components while doing so.

Insert the tip of an opening pick into the gap you just created.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.