Ir para o conteúdo principal
Help
Editando passo 9 —

Tipo de Passo:

Arraste para reorganizar

Repeat this procedure with the adjacent battery cell:

Apply a small amount (about 1 ml) of liquid adhesive remover under the battery cell, and wait 2-3 minutes for it to penetrate and soften the adhesive.

Alternatively, re-heat this section with your iOpener if needed.

Push a plastic card about an inch between the battery cell and the upper case, and slowly pry the cell up to separate all of the adhesive.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.