Ir para o conteúdo principal
Help
Editando passo 6 —

Tipo de Passo:

Arraste para reorganizar

If you don't have a liquid adhesive remover, you'll be using a hot iOpener to warm and soften a section of the adhesive securing the battery to the upper case, and then carefully prying at that point.

Use the hot iOpener to cover half of the two right-most battery cells.

After about a minute, reheat the iOpener and move it to cover the other half of the right-most battery cells.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.