Pular para o conteúdo principal
Editando passo 4 —

Tipo de Passo:

Arraste para reorganizar

With a gentle pull on the bottom of the inside of the radio, the main unit should come out (with a little resistance). Take care not to damage the O-ring gasket that surrounds this opening and protects the main unit.

As with anytime you handle electronics, you should observe standard electrostatic precautions when handling the internals.

Pivot and move the main unit out of the front cover at the bottom until the antenna connector and tuning knob stud are clear of the housing.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.