Ir para o conteúdo principal
Help
Editando passo 2 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 23 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Re-orient your iMac so it sits upright on the stand.

Insert a plastic card up into the corner of the air vent slot near the top of the rear case.

Push the card toward the top of the iMac to release the front bezel latch.

Pull the front bezel away from the rear case.

Repeat this process for the other side of the front bezel.

It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches. Or use two cards for the additional thickness.

If the bezel refuses to release, try lifting the lower edge of the front bezel slightly away from the rear case (detailed in the next few steps) and repeat the latch release process.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.