Ir para o conteúdo principal
Ajuda
Editando passo 14 —

Tipo de Passo:

Arraste para reorganizar

Repeat the previous heating and cutting procedure for the long edges of the phone. Do not cut the bottom edge yet.

There are large areas of adhesive holding the display to the frame. Work slowly and methodically to slice through as much of the adhesive as possible.

Leave an opening pick on each edge as you continue to the next to prevent the adhesive from resealing.

The display cable is located just above the midpoint on the right side, and may interfere with your pick if you pry too deeply.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.