Pular para o conteúdo principal
Editando passo 10 —

Tipo de Passo:

Arraste para reorganizar

Rotate the feet to the up position.

Using a T-8 torx driver, remove the screw located under each foot.

Remove the four screws at the front edge of the bottom case

Remove the remaining screw on the inside top edge of the case.

Carefully lift and rotate the top case toward you and disconnect the track pad cable from the motherboard.

Remove the interconnect to logic board cable from the opening for the right clutch.

Remove the top case.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.