Pular para o conteúdo principal
Ajuda
Editando passo 5 —

Tipo de Passo:

Arraste para reorganizar

Using a T-8 torx driver, remove the two floppy drive screws.

Using a small flat-blade screwdriver, pry up the cable end of the floppy drive and slide the drive to the left.

Slide the drive forward slightly and lift it partway out of the unit.

Disconnect the floppy drive cable from the motherboard and remove the drive.

If you are replacing the floppy drive or floppy drive cable, release the locking tabs and disconnect the cable from the drive.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.