Ir para o conteúdo principal
Editando passo 12 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 2 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Hold the motherboard by the corners and maneuver it out of its recess, being careful not to snag any cables.

During reinstallation, be sure to route both antenna cables underneath the motherboard edges, and direct them through the cable notches.

The fingerprint sensor connector can be tricky to reconnect during reinstallation.

Bend the fingerprint sensor cable slightly so that it bows upward near the connector.

Stand the motherboard up and position it such that the connector rests against the socket.

Use your finger to carefully align the connector and press it into the socket. Do not use excessive force! If done correctly, the socket should hold the connector securely.

If you are having a difficult time, follow this guide, which removes the fingerprint sensor from its indention before attaching it to the motherboard.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.