Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 1 —

Tipo de Passo:

Arraste para reorganizar

The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.

Remove four T10 Torx screws securing the power supply to the rear case.

Two fine-thread 7 mm T10 Torx

Two coarse-thread 7 mm T10 Torx

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.