Pular para o conteúdo principal
Ajuda
Editando passo 16 —

Tipo de Passo:

Arraste para reorganizar

To reassemble the hop-up unit and barrel, first slide the hop-up bucking onto the barrel, making sure to slide the line in the bucking into the groove in the barrel.

Then slide the barrel and bucking into the hop-up unit with the groove in the barrel facing down, and install the green clip.

Finally, slide the brass ring around the barrel and into the front of the hop-up unit.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.