Conserte seus objetos Comunidade Loja

dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement

Introdução

This is how you replace the internal ribbon power cord.

O que você precisa

  1. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Prerequisite Guide to Accessing Interior: passo 1, imagem 1 %32 dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Prerequisite Guide to Accessing Interior: passo 1, imagem 2 %32

    • Remove the rubber foot pads on the bottom of the device using a plastic opening tool.

    Editar

  2. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: passo 2, imagem 1 %32 dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: passo 2, imagem 2 %32

    • Remove the six 2 mm PH0 screws on the bottom of the device.

    • Four of those screws are located under the foot pads.

    Editar

  3. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: passo 3, imagem 1 %32

    • Gently remove the bottom of the device.

    Editar

  5. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Mother Board: passo 4, imagem 1 %32 dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Mother Board: passo 4, imagem 2 %32

    • Remove the four 1.8 mm J1 screws.

    • Remove the two 2mm PH0 screws.

    Editar

  6. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: passo 5, imagem 1 %32

    • Gently pick up the mother board

    • Pick the mother board straight up or you may risk damaging the mini-USB charging ports.

    Editar

  7. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: passo 6, imagem 1 %32 dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: passo 6, imagem 2 %32

    • Use a plastic opening tool or similar tool to gently pry the power ribbon cord out of its port.

    Editar

  8. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Power Board: passo 7, imagem 1 %32 dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement, Power Board: passo 7, imagem 2 %32

    • Remove the four 1.8 mm PH0 screws that are holding the board in.

    • When you remove these screws, the plastic cups inside the PS Move stations will fall out.

    Editar

  9. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: passo 8, imagem 1 %32

    • Pick up the board.

    • Pick the board straight up, or you risk damaging the charging ports.

    Editar

  10. dreamGEAR Quad Dock Pro Power Ribbon Cord Replacement: passo 9, imagem 1 %32

    • Using a plastic opening tool or a similar tool, gently pry the power ribbon cord out of its port.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 1 outro contribuidor

Jacob

Membro desde: 03/11/15

757 Reputação

Autoria de 6 guias

Emblemas: 16

+13 outros emblemas

Equipe

Colorado Springs, Team 4-4, Panko Spring 2015 Membro de Colorado Springs, Team 4-4, Panko Spring 2015

UCCS-PANKO-S15S4G4

Membros da 3

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 6

Duração total: 221