Alterações no passo nº 3
Edição por Ryan Doyle —
Edição aprovada por Ryan Doyle
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Starting on the edge that is opposite the hinge, use plastic opening tools to pry the back plate away from the computer. | |
| [* black] Loosen the three non-hinge edges. | |
| - | [* black] Leave a plastic opening tool in |
| + | [* black] Leave a plastic opening tool in each corner to ensure that one side does not snap close before you are done opening the others. |
| [* icon_caution] DO NOT lift the back plate away from the computer; it is still connected to the motherboard. |